Everwood Deck: The Advanced Vinyl Composite Decking Product for the New Century

Vinyl Cellular Decking System
Superior Performance Properties

Product Comparison:	Procell Decking Systems	Everwood Decking System
Enhanced Performance – With the cellular technology and unique formulations, Everwood Deck system creates the strongest and toughest decking board in the industry.
Water & Fire Resistant – Exclusive formulation composed of virgin vinyl and natural fibers only, Everwood Deck system guarantees excellent weather and flame resistance.	???
Optional Surface Patterns – Strong, dense surface prevents scratching, even in high-traffic areas. Available in Semi Gloss or Wood-emulated slip resistant surface.	Woodgrain Only	Multiple Surface Options
Minimized Expansion and Contraction – Due to exclusive proprietary additives.
Long Lasting Color, Fade Resistant – To guarantee the best performance on colors, Everwood Deck utilizes the pigments made by the world-class companies BASF and Clariant of Germany.	Custom Colors Not Advertised	Custom Colors Available
Stain Protection – Will not absorb stains, allows for easy soap and water clean up.
Mold Resistance – Vinyl composite does not harbor mold.
Easy Installation – NO special tools, NO preset holes to drill, NO special training needed. Standard construction methods are used.  40% lighter than other composite decking.  Any fastening system can be used – even hidden fastening systems for a screw free look.
Lightweight – 30-40% lighter than the average alternative decking
Lifetime Manufacture’s Warranty – One of the strongest in the industry.
Insect and Termite Protection – Does not attract insects and termites due to a unique formulation.
Environmentally-Friendly – Does not contain harmful chemical treatments.
Fastening System Options – Any fastening system can be used including our exclusive fastener & groove design that enables faster installation and a screw free look for a beautiful finish.	???
Availability –  Readily available, average order three to four weeks, depending on location and order size.	???	Readily Available (Even In Smaller Qty.)
ANOTHER OF OUR PRICE MATCH GUARANTEES:	???	Price Match Guarantee As Low As $2.95 Per Foot

Available Colors

WHITE, CLAY, TAN, GRAY AND CAYENNE

Installation
Instructions:

Prior to
installation, check with your local
regulatory agency for special coding
requirements in your area. The purchaser is
solely responsible for compliance with
applicable local codes. We recommend checking
with a licensed architect engineer or local
building official before installation. 

Recommended tools: Circular saw
(carbide tipped with less than 20 teeth is
preferred), carpenter’s level, tape measure,
corded or cordless drill

Joist span: 16-inch
center to center joist span is recommended for
residential installation. 12-inch center to
center joist span is recommended for commercial
installation. When installing boards at
45-degree angles, 12-inch center to center joist
span is recommended.

Installing
Decking

As illustrated,
there are two methods to install deck board.
Method-1 is the traditional one, while Method-2
taking advantage of Everwood Deck’s
fastener & groove system eliminates
pre-drilling and enables faster installation as
well. You may fasten the outside edge of the
first board to deck with screws. Then from the
second board, you can just use Everwood
fasteners to secure each board onto the joists
underneath at the intersection. Everwood
fastener will automatically maintain an
identical spacing between each board. When apply
a screw through the fastener, you need to make
sure that the screw head is relatively flush
with the fastener; and never over tighten screws
and bow fasteners. The fastener’s long edge must
remain parallel to the deck board so the next
deck board will fit snugly. Repeat the same
process for each board until the outside edge of
the last board is fastened with screws. To avoid
possible squeaks, deck boards are recommended be
glued on to joists with construction adhesive.

Gapping Gaps
between decking boards allow water to drain off
and also for the slight thermal expansion. A gap
of 1/8″ to 1/4″ is recommended. Everwood’s
groove & fastener system will provide a uniform
spacing between deck boards.

End-to-end &
Abutting gap Deck
boards must be gapped end-to-end, based upon the
temperature at installation. See chart on right.
When deck boards are abutting a wall or a solid
objects, gapping is also required. The gapping
could be a half of the end-to-end gapping.

Stairs Traditional
stairs require at least four stringers for a 36″
wide stair.

The above instructions are
just guidelines to help you install Everwood
Deck system. There might be some different
situations or factors, which requires expertise
and experience of a professional for your
specific project. To guarantee a successful
installation, consulting with an expert about a
project is always recommended. Everwood
disclaims any liability for improper
installation.